Page when updating your flashpaq

30-Jul-2020 02:02 by 7 Comments

Page when updating your flashpaq - access browser dating site

Using a lower octane fuel while the “Performance” or “Towing” Tuning Level is selected may cause “pinging” that can be harmful to your vehicle.

If your vehicle has not been returned to its STOCK program prior to service, the Superchips FLASHPAQ Tuner will no longer be able to program your vehicle.Log onto click on the FLASHPAQ icon for additional updates.1 Visit availability 2 Windows XP, 2000 or higher (MAC, UNIX, LINUX Not supported) Caution The “Performance” and “Towing” Tuning Levels require that you use at least 91 octane fuel.Vehicle Preparation Before connecting the FLASHPAQ Tuner to your vehicle, make sure that: • All power-draining accessories are turned off, including radio, lights, cell phones, etc…The FLASHPAQ Tuner needs full battery voltage to program your vehicle.Hardware Overview superships-flashpaq-understanding-the-hardware " data-medium-file="https://superchipsflashpaq.files.wordpress.com/2009/01/understanding-the-hardware.jpg? ) Upon completion, remove cable from vehicle Your vehicle is now programmed with Superchips tuning! ignitiion-key-positions " data-medium-file="https://superchipsflashpaq.files.wordpress.com/2009/01/ignitiion-key-positions1.jpg? ) Upon completion, remove cable from vehicle Your vehicle’s program is now returned to factory stock. Quick Start – Program my vehicle with User Options NOW!!!

*** Press DOWN to scroll as needed *** *** Press PLUS/MINUS to adjust options as needed *** From the Opening screen 1) Press ENTER – after selection of Performance Tuning 2) Press ENTER – after selection of Read Vehicle 3) Press ENTER – after selection of Read Stock 4) Follow ON SCREEN Prompts including any Vehicle Ignition ON/OFF requests (DO NOT START VEHICLE!!!

• Ensure your vehicle battery is fully charged and not connected to a battery charger.

• Do not leave the FLASHPAQ Tuner connected and unattended for any length of time. • Do not remove the programming cable during any programming sequence. Important Note Regarding Storage of Your Flash Paq Tuner It is not recommended to store your Flash Paq Tuner in your vehicle in extreme heat, direct sunlight, or extreme cold (temperatures near or below freezing).

The new FLASHPAQ Tuner includes the following features: Your 3815 FLASHPAQ tuner is setup specifically for your Dodge Dakota, Durango, Ram, HEMI Ram , and Jeep Grand Cherokee.

The 3815 FLASHPAQ houses specialized databases that contain optimally calibrated, individual vehicle application performance programs which tune BOTH the engine & transmission.

The new FLASHPAQ Tuner includes the following features: Caution For V8 engines, the “Performance”, “Towing”, and “HP4” tuning level requires that you use at least 91 octane fuel.

  1. Facetime sexchat on my iphone 16-Feb-2020 00:51

    Symantec reported as recently as summer 2016 there were a minimum of 13 fake or cloned sites perpetrating the same dating site scams; fake verification.